EDPT-410C2(C3) type microprocessor based transformer protection and monitoring device |
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
EDPT-410C2 (C3)type microprocessor-based transformer protection device applies to the transformer protection and monitoring of plant or station or distribution transformers in systems with the neutral point and those grounded via an arc suppression coil or resistor with voltage ratings of 35kV and below. protection function
measure function
control function
Ordering instructions Provide the following upon ordering: 1. Name, model and quantity of the device. Please specify any special requirement differs from our standard product. 2. Voltage class. The operating power supply for any device is intended for both AC and DC purposes, with 110V and 220V inputs; the 220V version will be provided unless otherwise specified. 3. Communication port: The device standard communication configure is a single 485. If needs dual RS485 network which shall be specified. 4. Ratings of key parameters For a protector, provide the nominal rated current (1Aor5A) For a device with the zero sequence current protection function in a low-current ground system, provide the rated zero sequence current (0.2Aor0.02A) 5. Term and place of delivery, means of transport 6. Other terms shall be negotiated. |