EDPL-610 type microcomputer line protection device |
|
EDPL – 610 type microcomputer line protection device is suitable for the 380 V ~ 35 kV voltage grade of transmission lines and bus coupler switch protection. Protection Function 1、Bus-charging protection(for bus-connector protection) 2、Instantaneous protection(with compound voltage and direction locking ) 3、Time limit instantaneous protection (with compound voltage and direction locking ) 4、Definite-time over-current protection (with compound voltage and direction locking ), inverse time over-current protection 5、Overload protection 6、Zero sequence over-current protection 7、Zero sequence overvoltage alarm 8、Low voltage protection ( under-voltage protection) 9、Under-frequency protection 10、Three phase once reclosing 11、Post-acceleration(instantaneous acceleration、Limit-time instantaneous、acceleration、over-current acceleration、zero sequence over-current acceleration) 12、PT Break Judgment Ordering instructions Provide the following upon ordering: 1. Name, model and quantity of the device. Please specify any special requirement differs from our standard product. 2. Voltage class. The operating power supply for any device is intended for both AC and DC purposes, with 110V and 220V inputs; the 220V version will be provided unless otherwise specified. 3. Communication port: The device standard communication configure is a single 485. If needs dual RS485 network which shall be specified. 4. Ratings of key parameters For a protector, provide the nominal rated current (1Aor5A) For a device with the zero sequence current protection function in a low-current ground system, provide the rated zero sequence current (0.2Aor0.02A) 5. Term and place of delivery, means of transport 6. Other terms shall be negotiated. |